5.2026.293.1 - 64 Harvey Street BURSWOOD


The Town has received a development application for two double-storey dwellings at the above-mentioned property.

In accordance with the Town’s Local Planning Policy 37 – Community Consultation on Planning Proposals, you are invited to comment on the following:

  • Primary Street Setback – Clause 1 A1 of the Town’s Local Planning Policy 25 – Streetscape provides for deemed-to-comply minimum street setback of 3.0 metres and average street setback of 6.0 metres from the front lot boundary.  The development plans show a proposed minimum street setback of 1.5 metre to the raised Alfresco and an average street setback of 5.86 metres.
  • Side Lot Boundary Setbacks – Clause 3.4 C3.4.1 of Part C of the Residential Design Codes (R-Codes) Volume 1 provides for a deemed-to-comply (minimum) side lot boundary setback of 1.5 metres for walls with a height between 3.6 metres and 7 metres.  The development plans show that a portion of the ground floor of Unit 1 comprising the Living and Dining rooms, which has a height up to 4 metres above the natural ground level, is proposed to be setback 1.0 metres from the north-eastern side lot boundary (adjoining No. 66 Harvey Street). 
  • Site Works - Fill and Retaining within the Street Setback Area – Clause 3.5 C 3.5.1 of Part C of the R-Codes provides for a deemed-to-comply maximum of 0.5 metres of fill and retaining within the street setback area. The development plans show that the Alfresco and a portion of the steps to the front door of Unit 1, which is located within the street setback area (between the dwelling and front lot boundary), proposes fill and retaining up to maximum height of 1.2 metres above the natural ground level.
  • Visual Privacy – The development proposes overlooking from various rooms / spaces into major openings and/or active habitable spaces of adjoining properties as follows:
    • Proposed Unit 1 – raised Alfresco – the cone of vision radius of a portion of the raised Alfresco overlooks into a habitable room window of the adjoining dwelling at No. 66 Harvey Street.  Clause 3.10 C3.10.1 of Part C of the R-Codes requires views from raised outdoor active habitable spaces to be setback 7.5 metres from major openings (such as large windows of bedrooms or living rooms) and/or active outdoor habitable spaces on adjoining properties.
    • Proposed Unit 2 –
      • Balcony – the cone of vision radius of the north-western side of the balcony overlooks into the outdoor active habitable space (backyard) of the adjoining property at No. 62 Harvey Street. Clause 3.10 C3.10.1 of Part C of the R-Codes requires views from raised outdoor active habitable spaces to be setback 7.5 metres from major openings and/or active habitable spaces on adjoining properties.
      • Upper Floor Sitting Room - the cone of vision radius of the upper floor Sitting Room window and sliding door (providing access to the balcony) overlooks into the outdoor active habitable space (backyard) of the adjoining property at No. 62 Harvey Street. Clause 3.10 C3.10.1 of Part C of the R-Codes requires major openings of habitable rooms (other than a bedroom or study) to be setback 6.0 metres from major openings and/or active habitable spaces on adjoining properties.

 Please note that the abovementioned matters will be considered based on the merits of the case, and with regard to the relevant design principles and any comments received from nearby affected landowner(s) and occupier(s).

The relevant design principles that the proposal will be assessed against are as listed below:

 

Planning document 

Council’s Local Planning Policy - Streetscape 

Design element 

Clause 1 – Setback of Buildings Generally 

Relevant design principle(s) 

P1. Buildings set back an appropriate distance to ensure they: 

  • contribute to the desired streetscape; 
  • provide adequate privacy for open space for dwellings; 
  • allow safety clearances for easements for essential service corridors; 
  • are consistent with the rhythm and scale of development in the street; 
  • promote the creation of new streetscape environments through the use of existing rights-of-ways; and  
  • protect residential amenity from disturbance from non-residential development abutting a right-of-way and provide safety of residential development add surveillance of the right-of-way. 

Planning document 

Residential Design Codes (R-Codes) Volume 1 

Design element 

3.4 Lot boundary setbacks 

Relevant design principle(s) 

P3.4.1 Lot boundary setbacks reinforce the location’s streetscape character and are consistent with the existing or desired built form local character.  

 

P3.4.2 The setback of development from lot boundaries provides a transition between sites with different land uses or intensity of development.  

 

P3.4.3 Buildings are set back from lot boundaries or adjacent buildings on the same lot to:  

  1. provide adequate solar access and natural ventilation to the building and open spaces on the site and adjoining properties; and  
  1. address the potential for overlooking and resultant loss of privacy on adjoining properties. 

Planning document 

Residential Design Codes (R-Codes) Volume 1 

Design element 

3.5 Site works and retaining walls 

Relevant design principle(s) 

P3.5.1 Development that considers and responds to the natural features of the site and requires minimal excavation/fill.  

 

P3.5.2 Where excavation/fill is necessary, all finished levels respect the natural ground level at the lot boundary of the site and as viewed from the street. 

 

P3.5.3 Retaining walls that result in land which can be effectively used for the benefit of residents, do not detrimentally affect the amenity of adjoining properties in the opinion of the decision-maker, and are designed, engineered and landscaped having due regard to the provisions of element 3.10 Visual privacy. 

Planning document 

Residential Design Codes (R-Codes) Volume 1 

Design element 

3.10 Visual privacy  

Relevant design principle(s) 

P3.10.1 Direct overlooking of major openings and active habitable spaces of adjacent dwellings and adjoining properties minimised through:  

i. building siting, layout and design; 

ii. design and location of major openings;  

iii. landscape screening of outdoor active habitable spaces; and/or  

iv. design and location of screening devices.  

 

P3.10.2 Adequate visual privacy achieved through appropriate interfaces between dwellings and adjoining properties including measures such as:  

i. offsetting the location of ground and first floor windows so that viewing is oblique rather than direct; 

 ii. building boundary walls where appropriate;  

iii. setting back the upper storeys from the lot boundary;  

iv. providing higher or lower windows, or windows with obscure glazing; and/or  

v. screening (including landscaping, fencing, timber screens, external blinds, window hoods and shutters).  

 

P3.10.3 Visual privacy strategies maintain amenity of habitable rooms and active habitable space with regard to solar access, natural ventilation and external outlook both within the development and for adjoining properties. 

Contact Details

Name: Kelly Vilkson

Job Title: Acting Coordinator Urban Planning

Phone: 0893118111

Email: admin@vicpark.wa.gov.au

FAQs

Where can I view the application?

How can I comment?

How can I find out more information?

Who will decide this application?

If you've encountered a problem with the website or have any general feedback, please provide comment via this form.

Was this page helpful?

Get Audio Code